The simplicity that is the operation of a plasma cutter is amazing. In fact, the hardest part is in selecting the right machine for the application as well the accessories. If you use a plasma cutter and you initially used oxy-acetylene, you will find that you will prefer using the former because of the many benefits it accrues. Not only did the plasma cutting improve on the productivity but also lowered the costs of cutting.
Is lotus lt3200 dual voltage? Usually when welding, you will have a heating cycle but with the plasma cutter, you will not need one. Plasma cutting allows you to cut any metal including the ones that conduct electricity unlike the previous tools that could not cut stainless steel or aluminium. The other benefits of plasma cutters are that they allow for portability around the job sites and minimize on the heat-affected zone.
The cutting capacity is what needs to guide you when it comes to asking questions when selecting the right plasma cutter. One of the considerations that you will have is the breadth of the metal that you cut on a routine basis. How fast you want to cut the metal as well as the maximum thickness that you are likely to cut are also the other considerations. The size of the plasma cutter will depend on the amperage and voltage just like the welding machine. However, the lotos ltp5000d 50amp non-touch pilot arc plasma cutter for cnc table and the welding machine are different in that you will need higher voltages for the former compared to the latter.
When selecting plasma cutters, it is important that you consider the cutting speeds and quality ratings. If you know the cutting speeds for the thickness of metal that is being cut, you will be able to calculate the production rates. The reason for this is so that you remove any potential bottlenecks during the cutting portion of the operation. It is important to note that most of the manufacturers will provide cutting speed charts which will allow you to compare the cutting speed performance.
Air and electricity are the two most important requirements for the plasma cutter. You need to know the type of input power that is available for the plasma cutter. However, input voltages of 190-630 V is what most of the plasma cutters will have. In most of the instances, these machines can be plugged in and be used anywhere in the world.
The wind tunnel technology that comes with the plasma cutters helps with environments with heavy dust and metal shavings. The cooling air is in such a way that it does not blow over the electronic components.